[responsive-menu menu="mobil-menu"]
Speedometer, Odometer & Module Repair
1
4321

Jeep Wrangler YJ 1987 – 1995 Bright Green LED

$24.99

Category:

Product Description

Jeep Wrangler YJ 1987 – 1995 Bright Green LED Dash Light Kit 194 74 T10 T5

This kit includes all of the bulbs to upgrade the Speedometer, Tachometer, Center Gauge Cluster & Heater Control in the 1987-1995 Jeep Wrangler YJ. We also include the bulb for the lower switches under the steering column. Just look at our photos and see the difference between old and new!

ALL OF THE KITS THAT WE SELL ARE TESTED IN OUR FACILITY IN MESA, AZ. WE TEST THESE KITS FOR FITMENT AND DURABILITY. CUSTOMER SATISFACTION IS OUR NUMBER ONE PRIORITY! INSTALL IS EASY. JUST REMOVE THE PANELS AROUND THE GAUGES. THEN UNSCREW THE GAUGES THEMSELVES. PULL THEM FORWARD, UNPLUG THEM, FLIP THEM OVER AND UNDO THE TWISTLOCK BACKLIGHTING BULB HOLDERS. PULL THE BULB OUT, AND INSTALL THE LED. PLUG THE GAUGE BACK IN, TURN ON THE LIGHTS. IF THE LED DOES NOT LIGHT. UNDO THE TWIST LOCK BULB HOLDER, AND ROTATE 180 DEGREES. THE BULB WILL LIGHT. LED’S ARE POLARIZED SO POSITIVE AND NEGATIVE MAKE A DIFFERENCE. (INSTALLING THE BULB BACKWARDS DURING TESTING WILL NOT AFFECT THE BULB) TOOLS NEEDED ARE A LONG AND SHORT #2 PHILLIPS SCREWDRIVER… ALL OF US AT ASAP SPEEDO ARE HERE TO ANSWER ANY QUESTIONS ABOUT THE KIT OR THE INSTALL… PLEASE CONTACT OUR CUSTOMER SUPPORT AT (480) 464-ASAP (2727)

Bulbs included in the kit are…

Speedometer: LED x 2
Tachometer: LED x 2
Center Gauge Cluster LED x 6
Heater Control LED x 1 (Plus 1 White if you choose for the heater control)
Lower Switch Light LED X 1

WE ALSO INCLUDE 3 EXTRA LED BULBS. WE INCLUDE THESE BECAUSE JEEP INCLUDED A COUPLE EXTRA BULBS DEPENDENT ON THE YEAR AND MODEL. WE ALSO INCLUDE AN EXTRA BRIGHT WHITE BULB FOR THE HEATER CONTROL HEAD. WE DO THIS BECAUSE WE HAVE FOUND IN OUR TESTING THAT THE GREEN MAY NOT LIGHT THE CONTROL BRIGHT ENOUGH.

You will receive 16pcs LED Bulbs Total…

Manufacturer part numbers that the bulbs will replace are: 194 & 74

Benefits of LED lighting:
Low power consumption
Low temperature
No delay in lighting
Simple to install
Vibration Resistant
Much brighter than original bulbs
Bulbs last up to 50,000 Hrs
Improved level of safety at night

Things to keep in mind when converting to LED lighting:

LED bulbs have a Positive and Negative. If the bulb is installed and does not light. Remove bulb, rotate 180 degrees, and plug back into socket. The bulb will light.

LED bulbs also have a lower wattage. This means that when installing in some vehicles they could cause an error code or flickering. This is most commonly found when installing into some Gauge clusters, and when used as flashing signal lights. (Due to the low wattage the computer thinks you have a bulb out) If you have any of these issues you will need to install load resistors, and/or a low wattage flasher unit.